Smooth Finish Mix

The Smooth Finish Mix are ideal for finishing smoothing and fine detail

18 felting needles (total) 3 of each needle listed below:
 

The 40 Gauge has 2 barbs a side - detail (blue tip)

The 42 Gauge has 1 barb a side - fine detail (gold tip)

The 40 Gauge Spiral Needle has 2 barbs a side and a twist in the needle to spread the barbs around the needle – smoother working and finished felt (light blue tip)

The 38 Gauge Crown has 1 barb a side all at the tip fine detail

The 40 Gauge Crown has 1 barb a side all at the tip smoothing

The 42 Gauge Crown has 1 barb a side all at the tip smoothing

Felting needles are brittle, and are therefore easily broken. To reduce breakages use the needle in a straight in, straight out motion. The needle is best not bent, wiggled or put under a lot of pressure. As a general rule if the needle will not enter a surface with ease do not force it. Possibly change the gauge needle you are using to a finer needle / higher gauge. There are lots of helpful videos online with useful techniques on reborn hair rooting. Packaged in a reuseable tube.

Care needs to be taken when using these needles as they are sharp, children under 16 should be supervised when using them.